-
70-500 Series High Speed Steel – Plastic Drill Router Bits | Onsrud
£10.48 – £330.20 +VATThese plastic drill router bits are designed to produce holes in hard and soft plastic while eliminating edge chipping and chip wrapping. -
Onsrud 70-300 Series | Trim Blade Flush Mount – Carbide Tipped
£194.10 +VATDesigned for flush trimming and slotting of both hard and soft plastics. Blades are permanently attached to arbors and are not reversible. -
Onsrud 70-200 Series | Solid Carbide – Trim Blade Flush Mount
£138.93 – £172.29 +VATThese small diameter solid carbide arbor mounted blades are designed for trimming and slotting plastics. Blades are permanently attached to arbors and are not reversible. -
70-100 Series Carbide Tipped – Trim Blade and Arbors | Onsrud
£137.69 – £154.55 +VATDesigned to trim and groove both hard and soft plastics. These blades run in conjunction with the blade arbors. Blades are reversible for right or… -
67-800 Series Solid Carbide – 8 Facet Drill | Onsrud
£35.44 – £225.67 +VATThe 8 facet drill is designed to reduce cutting forces and eliminate delamination when exiting the material. It consists of 4 cutting edges with 2… -
67-500 Series Solid Carbid Carbon Graphite Tool | Onsrud
£118.90 – £155.70 +VATThe geometry of this carbon graphite tool increases the amount of effective cutting flutes, resulting in superior performance over a standard burr. -
67-400 Series Solid Carbide Un-Ruffer | Onsrud
£102.58 – £212.52 +VATThe unique design of the Onsrud un-ruffer allows for the cutting performance of a burr while achieving a good surface finish. -
67-200 Solid Carbide – Phenolic Cutter
£111.86 – £163.33 +VATEqually adaptable to low or high spindle speed applications in any CNC machining environment. The free cutting action of the tools provides for better finishes… -
67-000 Series Solid Carbide Fiberglass Burr | Onsrud
£34.17 – £578.91 +VATThe fibreglass burr are designed as fiberglass routers. Their upcut/downcut diamond design effectively shears fibrous materials. -
66-900 Series Solid Carbibde High Performance Composite Router | Onsrud
£51.29 – £214.54 +VATThe new High Performance Composite Router is designed for more efficient routing of composite materials, in both hand-fed and in CNC applications. Coated with ALTIN… -
66-800 Series Solid Carbide DFC Coated Compression Router Bits | Onsrud
£234.49 – £247.60 +VATThe diamond film coated (DFC) solid carbide compression router bits unique geometry prevents delamination on top and the bottom edges of the composites. The open… -
66-300 Series Solid Carbide – Bottom Surfacing, Upcut | Onsrud
£26.35 – £160.11 +VATDesigned for pocket cutter machines where the bottom of the pocket must be smooth.
Shop
